Universal - Focusing on Green Technologies

General Information

*Required Fields

*Name:**
Company:
*Email:**
Phone:
Address:
City:	State:
Zip:	Country:

How did you find out about Universal?

Other:

Select Request Type

Literature Billing Technical Questions Quote

Literature Request

Type of Literature:

Billing Request

Billing Inquiry:

Technical Questions

Question / Comment:

Select Quote Request Type

Gas Turbine Silencer Gas Turbine / Compressor Inlet Air Filtration

Industrial Fan Silencer Blower and Engine Silencer

Vent Silencer Emissions Treatment

Gas Turbine Silencer Quote

Customer:		Date:
Customer Inquiry:		Project Reference:

Gas Turbine

Turbine Manufacturer and Model No.:
Turbine Power Rating (HP or MW):

Application

*Type of Silencer:**	Inlet Exhaust
Number of Silencer(s) Required:

*Please fill our separate forms if both Inlet and Exhaust Silencers are required.

If a complete system design is necessary, please provide the system requirements below:

Conditions

Flow Rate (lbs/sec, lbs/hr, acfm):		Allowable Pressure Drop, Silencer:
Flow Temperature (°F):		Allowable Pressure Drop, System:

Noise Specifications

	Octave Band Center Freq. (Hz)
Unsilenced	31.5	63	125	250	500	1K	2K	4K	8K
Turbine PWL: or SPL:
Turbine PWL: or SPL:
Silenced (required)
SPL: or Overall SPL or Attenuation:
SPL: or Overall SPL or Attenuation:	dB(A)

Unsilenced SPL is at feet away from the turbine inlet/exhaust and feet above grade

Silenced SPL is at feet horizontally from the silencer and feet above grade

PWL is Sound Power Level in dB (re 1 picowatt) and SPL is Sound Pressure Level in dB (red 20 micropascals)

Materials (if a material isn't specified, Universal's standards will be chosen)

Shell:	Thickness:		Type:
Internals:	Thickness:		Type:

Exterior Surface Preparation:
Exterior Finish:

Mounting

Silencer flange size:

Inlet (inches):

Outlet (inches):

Silencer orientation:

Vertical

Horizontal

Exhaust Stack (if applicable)

Dimensions:		Approximate Weight (lbs):
Wind Load:		Seismic Load:
Distance from grade to top of stack (feet):

Gas Turbine / Compressor Inlet Air Filtration Quote

Comapny Name:		Purchasing Agent:
Engineering Contact:
Address:		City:
State:		Zip:

Project Reference:
New Installation:		Refurbishment:
Project Location:		Specification Number:
Project Plan Dates
Design:		Installation:

Gas Turbine of Compressor Info

Gas Turbine or Compressor:		Number of Units:
Turbine Manufacturer and Model No.:
Compressor Manufacturer and Model No.:
Installation Date:

Inlet Air Volume

Combustion Air:		CFM
Generator Ventilation Air:		CFM
Process Air:		CFM
Allowable Pressure Drop Clean:		Inches w.g.
Allowable Pressure Drop Dirty:		Inches w.g.

Site Conditions

Location:

City

State

Country

Compressor Station

Chemical Plant

Cogen Plant

Utility

Offshore Platform

Refinery

Paper Mill

Other:

Ambient Temp. Range:	to	Degrees F.
Relative Humidity Range:	to	%
Seismic Zone: UBC:	ANSI:	Other:
Wind Load: P.S.F.:	MPH:
Snow Load: P.S.F.:
Design Pressure Load:
Atmospheric Considerations:
Other Considerations:

Eletrical Criteria

Available Voltage:

V.D.C.

Area Classification:
	NEMA:	NEC:	Class:	Group:	Div.:
	CSA:	Devices:	All Components:
	Labeled:	Other:

Filter Type Preferred

Multi Stage

Pulse Clean

Other:

Other Options (check all that apply)

Weather Hoods

Access Ladders

Anti-Icing

Blow-In Doors

Evaporative Cooling

Exhaust Silencers

Expansion Joint

Hoist

Inlet Silencers

Interior Lights

Service Playform

Stairway

Filter Outlet Locations

Back:		Bottom:		Side:		Other:
Specify:

Filter Outlet Flange Size:

Horizontal by

Vertical

Finish Requirements

Surface Preparation:

Coatings:	Interior	Exterior	Type	D.F.T.
Primer:
Intermediate:
Intermediate:
Final:

Materials of Constructions

		*Grade*
Filter House:	Stainless Steel:
	Carbon Steel:
	Aluminum:

Support Structure:	Carbon Steel:
	Painted:
	Galvanized:

Platforms / Ladders:	Carbon Steel:
	Painted:
	Galvanized:

Other Information

Other Information:
Roof Mounted:
Ground Mounted:
Size Restrictions:	Length: Width: Height:

Blower and Engine Silencer Quote

Application Type:

Blower Application

Engine Application

Application Information

Customer:		Date:
Inquiry and/or Project Reference:
Model:	No. Cylinders or Gear Size: RPM:
Inlet Size & Rating:	Outlet Size & Rating:
Gas:	Molecular Wt.:

Flow Conditions

Inlet Flow Rate:
	SCFM (14.7 PSIA and 70 · F)
	ACFM ( PSIA & · F)
	Lb/Hr ( PSIA & · F)

Outlet Flow Rate:
	SCFM (14.7 PSIA and 70 · F)
	ACFM ( PSIA & · F)
	Lb/Hr ( PSIA & · F)

Silencer Information

Inlet Silencer

Discharge Silencer

Inlet Size & Type:

Outlet Size & Type:

Max Allowable ΔP(inches H₂O):

External Material (CS, 304SS, etc.):

Internal Material (CS, 304SS, etc.):

Mounting Arrangement:

Legs, X =

Saddles

Legs, X =

Saddles

Shell Lugs

Base Ring/Skirt

Shell Lugs

Base Ring/Skirt

Side Connection Location:

Y =

Filter Information

Inlet Filter

Inline Filter

Inlet / Outlet Size & Type:

Element Type:

Panel

Cartridge

Panel

Cartridge

Single Stage Filtration (1 filter):

% on

microns

% on

microns

Double Stage Filtration (2 filter):

% on

microns

% on

microns

Max Allowable ΔP (inches H₂O):

Construction (CS, 304SS, etc.):

Mounting Arrangement:

Legs, X =

Miscellaneous Information

Special requirements such as leak testing, inspections, ASME Code design, extra couplings, etc.

Industrial Fan Silencer Quote

Customer:		Date:
Inquiry and/or Project Reference:

Application Information

Application:		Intake		Discharge		Other:
Type of Gas:		Air		Steam		Other:

Inlet Volume Flow (CFM):		Operating Pressure (psia/H₂O):
Allowable Pressure Drop (H₂O):		Temperature (°F):
Connection Sizes:Inlet:		Discahrge:
(Specify round or rectangular)
Size Restrictions:Length:	Width: Height:
Mounting Arrangements:
(Specify legs, lugs, saddles, runnions, skirt/base ring, etc.)
Special Material Requirements:
(Specify materials are carbon steel, both internal and external)
Special Finish Requirements:
(Standard finish is hand tool cleaning per SSPC-SP2, solvent cleaning per SSPC-SP1 and blue shopcoat primer)

Noise Specifications

	Octave Band Center Frequency (Hz)								Overall
	63	125	250	500	1K	2K	4K	8K	LINEAR	A-WT
Unsilenced Sound Power Level:
or
Unsilenced Sound Pressure Level at feet:

Required Insertion Loss at feet:
or
Required Sound Pressure Level:	dB(A) at feet

Blower / Fan Information

Manufacturer and Model No.:
Speed:	RPM
Size & Other Info:

Environmental Factors

Ambient Temperature Range:

°F

Relative Humidity Range:

Seismic Zone:

re:

UBC

ANSI

Other:

Wind Speed:		mph
Wind Pressure Load:		lb/ft²
Snow Load:		lb/ft²

Other Design / Pressure Loads:
Atmospheric Considerations:
Other Considerations:

Vent Silencer Quote

Application Information

Company:		Date:
Phone:		Fax:
Project Reference:

Gas Data

Type of Gas:
Molecular Weight:
Ratio of Specific Heats :
Pressure Upstream of Valve (psi(A)):
Temperature Upstream of Valve (oF):

Blowdown Application		Venting Application
Pressurized Volume (ft3):		Peak Flow Rate (lbs/hour): (Determined by valve mfr)
Maximum Blowdown Time (minutes):		Maximum Allowable Pressure Drop (psi):
Final Downstream Pressure (psi(A)):		Continuous, Intermittent or Occasional Service:

Valve Data

Maker:		Model:
Type:		Size (in.):
Rating:

Unsilenced Sound Levels

Please provide unsilenced sound levels, if available. Include distance and direction from vent and attach any schematics or sketches, if available. Show where the required silenced sound level applies on the sketch.

Schematics:

(.pdf, .dwg, .stp, .dxf, or .prt files only)

Octave Band Center Frequency(Hz):

SPL

PWL

31.5	63	125	250	500	1000	2000	4000	8000

Unsilenced Sound Level:

dB(A) at

feet

Silenced Sound Levels

Required Silenced Sound Level:

dB(A) at

feet

Mounting Requirements

Silencer Inlet Size and Rating:
Maximum Silencer Dimensions:
Inlet Orientation:	Axial	Side
Silencer Orientation:	Vertical	Horizontal

Supports:		Skirt & Base Ring		Shell Lugs		Legs
Supports:		Saddles		Nozzles		Other

Special Material Requirements

Shell:
Internals:

Finish

Standard:	Hand tool cleaning, per SSPC-SP@ and solvent cleaning per SSPC-SP1 with high heat aluminum paint finish
Optional:

Additional Comments

Emissions Treatment Quote

Application Information

Company:

Date:

Engine

Make:
Model:
Fuel Type:
Fuel Sulfer Level:
Fuel Rate:
Rated Power/Speed (Hp/rpm):
Load Factor:
Exhaust Flow Rate (acfm):
Exhaust Gas Temp (C):
Max Back Pressure from Catalyst System (H2O):
Lubrication Oil Used:

System

Please attach a CAD drawing of the equipment and any special integration requirements.

Catalyst Servicability Required:

Yes

Silencing Required:

12-18 dBA

18-25 dBA

25-35 dBA

35-42 dBA

Housing Material:
System Integration:
CAD Drawing:	(.pdf, .dwg, .stp, .dxf, or .prt files only)

Emission Reduction Requirements

	Untreated Level	Treated Level	Units (If ppm, specify O2% correction)
CO:
NO:
NO2:
THC:
NMHC:
PM:
O2:

Test Method (ISO 8178-1 Type D2 unless otherwise specified):
Potential Production Order Size:

Please attach an engine data sheet if available.

Engine Data Sheet:

(.pdf, .dwg, .stp, .dxf, or .prt files only)

Information & Quote Requests

General Information

Select Request Type

Literature Request

Billing Request

Technical Questions

Select Quote Request Type

Gas Turbine Silencer Quote

Gas Turbine

Application

Conditions

Noise Specifications

Materials (if a material isn't specified, Universal's standards will be chosen)

Mounting

Exhaust Stack (if applicable)

Gas Turbine / Compressor Inlet Air Filtration Quote

Project Plan Dates

Gas Turbine of Compressor Info

Inlet Air Volume

Site Conditions

Eletrical Criteria

Filter Type Preferred

Other Options (check all that apply)

Filter Outlet Locations

Finish Requirements

Materials of Constructions

Other Information

Blower and Engine Silencer Quote

Application Information

Flow Conditions

Silencer Information

Filter Information

Miscellaneous Information

Industrial Fan Silencer Quote

Application Information

Noise Specifications

Blower / Fan Information

Environmental Factors

Vent Silencer Quote

Application Information

Gas Data

Blowdown Application

Venting Application

Valve Data

Unsilenced Sound Levels

Silenced Sound Levels

Mounting Requirements

Special Material Requirements

Finish

Additional Comments

Emissions Treatment Quote

Application Information

Engine

System

Emission Reduction Requirements

Special Instructions / Comments

Universal Global & Americas Headquarters

Universal (Shanghai) Co., Ltd.

Universal Asia Pacific, Pte. Ltd.

Universal GmbH

Universal Europe, Ltd.